GDS SP40 PLUS series, Руководство пользователя

Страница: 53 / 100

User Manual Family
MAN10239-02 48
Program Setup
Setup Parameter Values Description
PROTOCOL EPSON 570*, IBM X24E*
X24E AGM, IBM 2390,
OLI. PR40+, OLI. PR2*,
OLI. PR2845, IBM 4722, IBM
9068, HPR 4915 Defines the printer protocol.
NOTE: For the IBM 4722 and 9068 protocols, if
the software driver uses the controlled link of
the IBM financial driver, set the IBM FINANCIAL
item in the Configuration Menu.
The default value is EPSON 570 for Program1,
IBM X24E for Program 3, OLI. Pr2 for Program
2 and 4.
FONT Draft*, Courier, OCR-B,
Gothic, Prestige, Present,
OCR-A, Script, Boldface Selects the font.
QUALITY MODE LQ*, NLQ Select the level of quality font.
DRAFT MODE DRAFT*, HSD, VHSD Select the level of draft font.
DOWNLINE LOADING disabled, enabled* Disable or enable the font downloading
HORIZONTAL PITCH 10 cpi*, 12 cpi, 15 cpi,
16.6 cpi, 17.1 cpi, 20 cpi,
30 cpi Selects the character spacing in characters per
inch (cpi).
VERTICAL PITCH 5 lpi, 6 lpi*, 8 lpi Selects the line spacing in lines per inch (lpi).
LOCK no lock*, font, hor. pitch,
font+hor.pitch The following selections made in the printer setup
may be locked: font, horizontal pitch (hor.pitch), or
both the font and horizontal pitch (font+hor. pitch).
The locked settings cannot be changed via
software commands.
FORM LENGTH
Minimum=1
Maximum=255
Current=70 # lines, A4*, letter, A5, legal Sets the page length in number of lines or
standard formats A4, Letter, A5 or Legal. If you
select # lines, you must indicate the number of
lines you want to set in the scheme below this
selection. The values range between 0 and 255.
To set the values combine the numbers
considering that the first line corresponds to the
hundreds, the second line to the tens and the third
line to the units. See the example below.
FORM LENGTH
(for tractor only)
Minimum=1
Maximum=255
Current=72
# lines*, A4, letter, A5, legal Sets the page length in number of lines or
standard formats A4, Letter, A5 or Legal. If you
select # lines, you must indicate the number of
lines you want to set in the scheme below this
selection. The values range between 0 and 255.
To set the values combine the numbers
considering that the first line corresponds to the
hundreds, the second line to the tens and the third
line to the units. See the example below.
Example:
How to set the form length to 82 lines:
FORM LENGTH
█ #lines ( )A4 ( )Letter ( )A5 ( )Legal
100x ( )0 ( )1 ( )2
10x ( )0 ( )1 ( )2 ( )3 ( )4 ( )5 ( )6 ( )7 █ 8 ( )9
1x ( )0 ( )1 █ 2 ( )3 ( )4 ( )5 ( )6 ( )7 ( )8 ( )9