GDS SP40 PLUS series, Руководство пользователя

Страница: 88 / 100

User Manual Family
MAN10239-02 83
Paper Specifications
The documents must all guarantee the following characteristics:
o
Use paper matching the
indicated characteristics
.
o
They must have well defined top and left
edges
, with a square
angle tolerance
of 0.1° on all edges.
o
Paper with
holes, perforations, folds or tears
anywhere within the print area of the document cannot
be feeded from the front input chute, but could be eventually managed by the rear tractor requesting
the specific Compuprint SP40plus model.
o
The
radius on a corner
of the form must be within 9.5 mm from the left or right edge.
o
The form to be printed must not contain
foreign material
.
o
Form
opacity
must be at least 75%. Forms with a lower opacity may cause feed errors.
o
Never print on documents with
metallic or hard plastic fasteners or staples
, they may damage the
printer. Use only
sewn
passbooks.
o
To get the maximum
print contrast
you should print on white or light colored paper. You may
overstrike to improve the low contrasting paper.
o
It is preferable to use single and multiple documents with the
fibre
running in the insertion direction of
the printing unit.
o
Recycled
paper is permitted on principle.
o
It is preferable to print on multiple forms with
a narrow glue strip or top-gluing
. The gluing must not
cause waving in the set of forms.
Cuts Sheets
Insertion direction
Print Area
A
B
C
C
D
E
Dimensions Maximum Minimum
A
Form width 244 mm (9,606 in.) 65 mm (2,559 in.)
B
Form length 470 mm (18,50 in.) 65 mm (2.559 in.)
C
Distance between dot position and left or
right paper edge
- 3.0 mm (0,1181 in.)
D
Distance between top of the first printed
line and top margin of the document
- 1 mm (0.0394 in.)
E
Distance between the lower margin and
the lower part of the last printed line
-
5.8 mm (0..2283 in.)
Reduced to 1.5 mm (0.0591 in.) with
item SAFE BOTTOM EDGE = no
Weight (original) 200 g/m
2
40 g/m
2
With paper <60 g/m
2
set the item
PASSBOOK TYPE = horizontal
Weight
(or 1 to 6 copies)
1
st
75 g/m
2
other 75 g/m
2
carbon 35 g/m
2
1
st
55 g/m
2
other 45 g/m
2
carbon 14 g/m
2
Thickness
Single form media up to 0,65 mm (0.0256 in.)
Multi form media up to 0.65 mm (0.0256 in.).
Overall thicker than 0,35 mm (0.0138 in.) may cause print quality
degradation in last copy.