GDS SP40 PLUS series, Руководство пользователя

Страница: 29 / 100

User Manual Family
MAN10239-02 24
LCD display messages (only for the model with it)
Upper line message
Lower line message Indication
STARTING UP
The printer initialization phase is starting-up.
..INIT..
The printer initialization phase is ended
SP40plus Rel. xxx
The printer firmware release message
PRINTER READY
PROG1 DRAFT
The printer is in normal ready status showing the current Program and the current Font.
PRINTER READY
HEX-DUMP MODE
The printer is in normal ready status in hex dump mode.
PRINTER OFF-LINE
PUSH READY
The printer is in off-line status.
PAUSE ON PRINT
PUSH READY
The printer is going in off-line status while data are in the buffer and ready to be printed.
WAITING MEDIA
INSERT MEDIA
Data are sent to the printer, the printer is waiting for the insertion of the paper.
PRINTER BUSY
EPSON PARALLEL
The printer is currently printing showing the used Emulation and interface
SET UP
The printer is in Set Up status and is waiting for a blank sheet to be loaded
See “
Printer Setup ” later in this manual.
SETUP PAG=CONF
ST1=PAG ST2=PRT
The printer is waiting for a Set Up operation selection.
See “
Printer Setup ” later in this manual.
REMOTE SETUP
FROM: USB
The printer is Setup via Remote tool connection.
NVM CHANGED
The firmware of the printer has been updated and the NVM values have been resored to
the default parameters.
Specific messages for LAN and tractor models
INIT LAN
The LAN initialization phase is ended
PRINTER READY
LOADING MEDIA
The printer is in normal ready status and is loading the continuous paper.
PRINTER READY
PARKING MEDIA
The printer is in normal ready status and is parking the continuous paper.
PRINTER READY
TEAR-OFF MANU.
The printer is in normal ready status and is moving the paper at tear position (Tear set in
manual as default).
PRINTER OFF-LINE
TEAR-OFF MANU.
The printer is in normal off-line status and is moving the paper at tear position (Tear set in
manual as default).
PRESS READY to
ABORT SETUP
The printer is power-on for Setup mode with continuous paper already loaded.
PRESS EJECT to
PARK & RUN SETUP
The printer is power-on for Setup mode with continuous paper already loaded.
RELEASE KEY
To FORM FEED
The Tear/FF key is pressed for more than 2 seconds and the Form Feed action has
starting
RELEASE KEY
To TEAR OFF
The Tear/FF key is pressed for less than 2 seconds and the Tear action has starting