GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK, Руководство по установке

Страница: 11 / 17

- 10 - October 17
th
, 2019 Installation Manual for SR-1000 Standalone Media Player
3. Hardware Installation & Setup
As shown in Figure 5, take note of the positions of the HD-SDI connectors & the cables
connected to the Media Block. The connector cables must be crossed, to minimize bending of the
cables.
3.2 Insert the SR-1000 Media Block into the Metal Chassis
Insert the SR-1000 Media Block into the metal chassis. While doing this, it is essential to align the
Media Block properly against the side railings of the metal chassis, as highlighted in
Figure 8 .
Make sure the PCI-e connector on the Media Block is inserted to the PCI-e connector at the rear
of the chassis. The SR-1000 Media Block faceplate should be flush with the front panel of the
chassis, once properly inserted.
Figure 6: Side Railings of Metal Chassis
Figure 7: PCI-e Connector of Metal Chassis
Figure 5: HD-SDI Connector cables on SR-1000 Media Block