- 14 -
October 17
th
, 2019
Installation Manual for SR-1000 Standalone Media Player
4. Projector Configuration in SDI Mode
4 Projector Configuration in SDI Mode
For the HD-SDI link decryp
tion to work, the Projector’s IP must be configured on the SR-1000.
To do this:
1. Go the WebUI Interface & click on the
Configuration
menu.
2. Under the Configuration screen, select the
Playback
tab.
3. Under the
Projector
section, enter the IP Address of the Projector & click on the
Save
button.
Set the correct macro (video input to Projector is '
SDI
') on the Projector and turn on the lamp.
On the WebUI, load a playlist and start the playback to check if content can be played
successfully. For more details regarding this, please refer to the
SR-1000 User Manual
.
Figure 13: Set Projector IP
Note: The Tamper LED will never be lit when the SR-1000 is in SDI mode.
The Tamper LED will never be lit when the SR-1000 is
in SDI mode.