- 9 -
October 17
th
, 2019
Installation Manual for SR-1000 Standalone Media Player
3. Hardware Installation & Setup
3 Hardware Installation & Setup
3.1 Remove the dummy cover plate from Metal Chassis
Before inserting the SR-1000 Media Block into the metal chassis, remove the dummy cover plate
from the front panel of the chassis. Use a Phillips-head screwdriver to remove the screws on
either side of the cover plate, as shown in
After removing the cover plate, affix the plate into the slot provided on the top panel of the metal
chassis for safekeeping (as indicated in
Figure 3: Remove cover plate
Figure 4: Affix cover plate on top panel