Gas Detection (Australia) Pty Ltd
GTD 2000 Ex Operating Manual
Page 15 of 26
M-GTD2000Ex-01-01
7.1 WHEN DISPLAY MEASURING CONDITION
-.The first line alternately displays measured gas
name and gas unit.
[ %LEL]
[ COMB.]
-.The second line displays current measured values.
-.Each switch will operate only when touching by
magnet-bar.
7.2 WHEN PROGRAMMING
-.Touching "FUNC" switch with magnet bar for over 2
seconds will set the detector to PASSWORD MODE.
[PASSWORD]
-. Input password (2 digits set by user) with “
▲
” or
“
▼
” switch and touch “FUNC” switch to go into
Menu selection mode
-.This mode changes
systematically
when every
touching “
▲
”, “
▼
”switch.
[ P R O G R A M ]
-. Touch “FUNC” switch when program mode is
display will set the detector to PROGRAM MODE
-. Touch “RESET” switch to go back to the detecting
mode.
[ G A S S E L . ]
-.This is the mode that sets gas name, it’ll change
when every touching “
▲
” or “
▼
”switch.
-.Touch “FUNC” switch when desired name is
displayed, gas name will be set up and the detector
enter into the next program mode.
-.Touch “RESET” switch to go back to “PROGRAM
MODE”.
-.This is the mode that sets measuring unit up, it’ll
change when every touching “
▲
” or “
▼
”switch.
[ U N I T S E L . ]
-.Touch “FUNC” switch when desired measuring unit
is displayed, the unit will be set up and the detector
enter into the next program mode.
-.Touch “RESET” switch to go back to “PROGRAM
MODE”.
Gas Detection for
Defence
