Gas Detection (Australia) Pty Ltd
GTD 2000 Ex Operating Manual
Page 16 of 26
M-GTD2000Ex-01-01
-.This is the mode that sets decimal point up, it’ll
change when touching “
▲
” or “
▼
” switch.
[ D - P O I N T ]
-.Touch “FUNC” switch when desired decimal point is
displayed, the point will be set up and the detector
enter into the next program mode.
-.Touch “RESET” switch to go back to “PROGRAM
MODE”.
-.This is the mode that sets up the value of high
scale to be displayed when LCD is full scale of
detection range, it‘ll increase or decrease when
every touching “
▲
” or “
▼
” switch.
[ H I G H S C L ]
-. Touch “FUNC” switch when desired value of high
scale is displayed, the point will be set up and the
detector enter into the next program mode.
-.This mode is to set the password, be checked
before going into parameter changing mode or
Maintenance mode. The password number is
increased or decreased on every touch of “
▲
” or
“
▼
” switch.
[ P ASS S ET ]
-.If desired password number is displayed, touch
“FUNC” switch to set the password and go back to
“PROGRAM MODE”
Gas Detection for
Defence
