www.GCCworld.com LABEL EXPRESS / DECAL EXPRESS User Manual
85
CCD Adjust Distance
Move the position of the CCD module rightwards or leftwards to allow CCD
module to read the registration mark when the mark is out of field of view of the
CCD module. If moving CCD module rightwards, input positive value and input
negative value if moving leftwards.
Operation Tab
Operation allows users to learn, save and load the marks and define the number of
jobs to be performed each run.
NOTE
The default origin of CCD module is at
“0” on the alignment rule for CCD
module. If moving the CCD module to the right by 20 mm, you should input
“20” in the CCD Adjust Distance to calibrate the new origin of CCD module.
Default origin
New origin
[
Field of view of
CCD module
