www.GCCworld.com LABEL EXPRESS / DECAL EXPRESS User Manual
10
Identify the danger zone
by installing
warning lights
and
warning signs
outside the area.
The danger zone must be secured against unauthorized access.
The operator of a Class 4 laser system should always
wear laser protection
goggles
suitable for the laser wavelength in use and with optical density at least
OD5+ within the danger zone.
An additional warning light should also be installed in a visible location to warn the
machine operator of any emerging laser radiation.
1.6 Operating Environment
Please follow the guidelines when considering a suitable location to set the
LABELEXPRESS/DECALEXPRESS Series. Improper work environment may lead to
operational malfunction and/or unsafe working conditions. The
LABELEXPRESS/DECALEXPRESS Series should be placed and operated in a
standard office-type environment.
Avoid environments where the machine is exposed to high levels of dust,
temperature (temperature exceeding 30°C or 85°F) or humidity (humidity
exceeding 70% or where the ambient temperature is near the dew point).
Avoid small, enclosed areas with poor ventilation.
Avoid areas with high levels of noise and electrical noise.
Designed to allow for rapid emergency egress
Select a location that is large enough to accommodate the machine, an exhaust
system, a computer and a work or storage table.
Select a location in which the ambient temperature remains between 15°C and
30°C (60°F to 85°F).
Select a location in which the relative humidity remains between 30% - 40%.
Select a location in which there is a short, direct path to the fume exhaust system.
Set the machine on a floor surface that is completely even.
