TESI
Relax
13
gbo Medizintechnik AG
Version 2.1
1.
Insert the service card or adjustment card in the intended slot at the Touch Screen.
2.
You are in the menu. Act according to the instructions on the Touch Screen.
3.
Touch the
Button
for settings.
4.
You are in the submenu settings. The submenu provides the above-mentioned options.
5.
Modify the device settings by touching the respective
Button
.
6.
Change the parameters to the desired setting.
7.
To store confirm by touching the Button
(OK)
. If you do not want to store the modifications of the
settings touch the Button
(Abort)
. You return to the menu.
8.
Pull out the chip card. Dependent on the access control, the following request appears on the display:
“Please insert your chip card to activate!”. The table is ready for treament.
2.5.3
Basic settings
The following therapy settings can be customized and will be automatically restored when the device starts
up:
Settings
Possible options
Basic settings upon delivery
Compression of the rolls
0 - 100
50
Speed (cm/s)
0 - 15
5
Vibration (Hz)
off, 15 - 35
19
Spine area
analog
Height of stepped bed (cm)
0 - 50
0
Temperature (°C)
15 - 35
20
Time of treatment (min)
0 - 30
10
Volume of audio signal
0 - 15
0
Table 2:
Basic settings
1.
Insert the service card or adjustment card (see Chapter 3.5) in the intended slot at the Touch Screen.
2.
You are in the menu. Act according to the instructions on the Touch Screen.
3.
Touch the
Button
for basic settings.
4.
You are in the submenu basic settings. The submenu provides the above-mentioned options.
5.
Modify the device settings by touching the respective
Button
.
6.
Change the parameters to the desired setting.
7.
To store confirm by touching the Button
(OK)
. If you do not want to store the modifications of the
settings touch the Button
(Abort)
. You return to the menu.
8.
Eject the chip card. Dependent on the access control the following request appears on the display:
“Please insert your chip card to activate!”. The table is ready for treament.
