U/M-2013-1000
Revision B
S1080 User’s Manual
Page 46
Company Proprietary
August 22, 2013
NOTES:
1.
The
Motion Detection
feature is disabled for MJPEG mode. The user needs to ensure that the
primary Codec is H.264 or MPEG4.
2.
Click
Enable Alarm
to select the save type (see
Section 17.0, Alarm
). The user may save the
recording files through FTP and SMTP, or save it to the local SD card, if one has been installed
in the camera (see Section 6.1.4.6.
3.
In addition, the user can use
Alarm Duration
to specify the length of the recording file (see
Section 17.0, Alarm
).
10.1.1
Zone Selection
The video frame (screen) is divided into 48 zones (8 horizontal and 6 vertical). Place the mouse cursor
on the video frame and left-click on the desired section, and the striped-red zone rectangles display.
The user can set more than one targeted zone. Click a second time on a zone to de-select it.
Figure 10.3
Motion Detection Setting Screen
10.1.2
Sensitivity
Select the sensitivity of the motion detection from the drop-down list: Low, Medium, or High.
10.1.3
Customized Threshold
Click on the
Customized Threshold
radio button to enter a customized threshold for the motion
detection. The range is from 1 to 100.
10.1.4
Enable Motion Window OSD Indication
1.
Click on the
Enable Motion Window OSD
indication
checkbox to enable the on-screen display
(OSD) feature (see Figure 10.4).
The user receives visual feedback when motion is detected (see
Figure 10.6).
Selectable Zones
6 Zones
8 Zones
Содержание S1080 Series
Страница 98: ......