U/M-2013-1000
Revision B
S1080 User’s Manual
Page 12
Company Proprietary
August 22, 2013
2.3
UPNP-
AND
DHCP-E
NABLED
N
ETWORK
I
NSTALLATION
The GBOT IP Network Camera is designed to be used on an IP network and needs an IP address. Most
networks have a DHCP server that automatically assigns an IP address to a connected device.
Step 1
Connect Camera(s) to PC Using Ethernet Cable(s) and POE Switch
1.
Using a standard Ethernet cable, connect the power-over-Ethernet (POE) switch to your PC
(see Figure 2.18).
2.
Using standard Ethernet cable(s) connect the POE switch to the camera(s) through the LAN/POE
receptacle(s) located on the back of the camera(s) (see Figure 2.19).
Figure 2.18
PC to POE Switch to Cameras
Figure 2.19
Ethernet Cable Inserted into Back of Camera
Step 2
Power On Camera Through POE
The camera is powered-up through the POE 802.3af-enabled network switch. (If POE support is
not
available, an external 12V DC power supply is required. See
Step 3, Power On Camera with DC Power
Supply
,
in
Section 2.1
,
Camera Connected Directly to a Personal Computer
.
LAN/POE/slot
Ethernet Cable
Ethernet Cables
POE Switch
Networked PC
Cameras
Содержание S1080 Series
Страница 98: ......