Quick Reference Guide
QRG-S1080-1000
Revision B
August 22, 2013
Company Proprietary
Page 15 of 22
Selection
Action
6.
Histogram
Enable/disable histogram on the primary video stream: ON or OFF (see an
example in Figure 21).
7.
Lens Distortion Correction
Enable/disable lens distortion: ON or OFF.
Click on the
OK
button to save your selections and wait for the changes to take effect.
7.1
Camera
–
Advanced Settings
Click on the
Advanced
button on the
Camera Screen
and the
Advanced Video Screen
opens. Here you can make
additional selections to the camera. These advanced settings are described in the
GBOT S1080 User’s Manual
.
7.2
Camera
–
Pan/Tilt
At the
Settings Camera Screen
(see Figure 21), click on the
Pan/Tilt Button
, located at the bottom-right side of the
screen, and the
Camera > Pan/Tilt Screen
opens. At this screen you can set pan and tilt conditions. These selections
are described in Table 3, below.
Figure 22
Camera > Pan/Tilt Screen
Table 3
Pan/Tilt Settings
Selection
Action
1.
Pan Speed
Use the slider to specify the desired pan speed from 0 to 64; the default is 32. A higher
value gives a faster pan speed.
2.
Tilt Speed
Use the slider to specify the desired tilt speed from 0 to 63; the default is 32. A higher
value gives a faster tilt speed.
3.
Baud Rate
Specify the baud rate from the drop-down list.
4.
Zoom Speed
Specify the zoom speed from 0 to 3.
Alignment
Controls
