![background image](http://html.mh-extra.com/html/gbc/fusionpunch-ii/fusionpunch-ii_service-manual_571157093.webp)
Quality RAP 5.6 Documents Not Punched
GBC FusionPunch II Service Manual
12/2003
3-13
14A. Activate the output and check AC
voltage across J9-NUI and J9-MT2 on
the Punch AC/DC Distribution PWB.
There is 110 VAC at this point.
Y
N
Replace the Punch AC/DC
Distribution PWB (PL 3.1).
Check the harness from J9-NUI on the
Punch AC/DC Distribution PWB to the
Punch Motor, and from J9-MT3 on the
Punch AC/DC Distribution PWB to the
Punch Motor. If the harness is OK,
replace the Punch Motor (PL 1.1F).
15.
Disconnect P/J30 on the Punch I/O
PWB. Activate the output again and
check LED L0B1 on the Punch I/O
PWB.
The LED is lit when the output is active.
Y
N
Check continuity between J1-HV07
on the Little Star Controller PWB
and P22-OUTB2 on the Punch I/O
PWB.
If the harness is faulty, replace it
(PL 6.1D). If the harness is OK,
replace the Little Star Controller
PWB (PL 3.1).
Check continuity and for shorts to
ground between P 30-OUTB1 on the
Punch I/O PWB and P11-MT3 on the
Punch AC/DC Distribution PWB.
The harness is OK.
Y
N
Replace the harness (PL 6.1A)
Go to Step 15A.
15A.The Punch Motor is enabled with a
ground on P/J11-MT4. When the output
is activated, there should be 0VDC at this
point. When the output is deactivated,
there should be +24 VDC.
Activate and then deactivate the output
and check for 0VDC and then +24 VDC
between P/J11-MT4 and P/J 12-0V on
the Punch AC/DC Distribution PWB.
There is 0VDC when the output is
activated and +24VDC when it is
deactivated.
Y
N
Replace the Punch I/O PWB
(PL 3.1).
Activate the output and check AC voltage
across J9-NUI and J9-MT3 on the Punch
AC/DC Distribution PWB.
There is 110 VAC at this point.
Y
N
Replace the Punch AC/DC
Distribution PWB (PL 3.1).
Check the harness from J9-NUI on the
Punch AC/DC Distribution PWB to the
Punch Motor, and from J9-MT3 on the
Punch AC/DC Distribution PWB to the
Punch Motor. If the harness is OK,
replace the Punch Motor (PL 1.1F).
Содержание FusionPunch II
