GBC 620os
Operation Manual
© 2007 General Binding Corporation
Page 17
LOADING FILM & THREADING FILM
Figure 13
Figure 14
STEP 12:
•
The
Burst Roller
can be adjusted up or down
determining weather more or less pressure is
needed for “Bursting”. Start by lowering the
roller by using the
Burst Roller Knob
until there
is about ½ to 1 inch of roll contact. (
Figure 13
).
•
If the images are not separating, lower the
Burst
Roller
a little until consistent separation is
achieved.
STEP 13:
•
Adjust the
Paper Guides
on the
Rear Table
so
that the separated sheets fall onto the
Rear Table
and stay in a pile.
•
The Angle of the
Rear Table
can be adjusted by
pushing in the pins and raising or lowering the
leg.
