Page 8-1
ProCut 17P – Installation and Operating Instructions
There are eight functions which are as follows:
Function Name &
Rendered Drawing
Description
When to Use
Behind Blade Program
Behind Blade cutting
used in program setup.
When doing large jobs with multiple cuts.
In Front Blade Program
In Front Blade cutting
used in program setup.
When doing large jobs with multiple cuts.
Clamping Force
17.00
01 00.00
02 00.00
03 00.00
04 00.00
05 00.00
06 00.00
07 00.00
08 00.00
Front blade
Program 00
Clamping
Force
5
Numeric value of
pressure applied to the
media by the Clamp.
When the paper is pulling out from under clamp during
cutting process or if too much pressure being applied
is leaving clamp marks on the media.
Unit of Measurement
17.00
01 00.00
02 00.00
03 00.00
04 00.00
05 00.00
06 00.00
07 00.00
08 00.00
Clamping
Force
5
Unit
inch
Measurements can be in
millimeters or inches.
Use either option depending on personal preference.
Buzzer Mode
17.00
01 00.00
02 00.00
03 00.00
04 00.00
05 00.00
06 00.00
07 00.00
08 00.00
Unit
inch
Buzzer mode
ON
Ability to turn on/off the
audio warning for the
Safety Curtain.
You are turning off an audible warning for a safety
feature, use at your own discretion.
Reblading Mode
17.00
01 00.00
02 00.00
03 00.00
04 00.00
05 00.00
06 00.00
07 00.00
08 00.00
Buzzer mode
ON
Reblading
Mode
OFF
Service mode used when
replacing the blade.
CALL YOUR LOCAL SERVICE TECH OR DEALER
FOR BLADE REMOVAL OR SHARPENING.
Count Value
17.00
01 00.00
02 00.00
03 00.00
04 00.00
05 00.00
06 00.00
07 00.00
08 00.00
Count Value
000160
Reblading
Mode
OFF
Provides the total cuts
performed during the
lifetime of the machine.
After approximately 2,000 cuts the blade should be
sharpened.
Compensation
Service adjustment to
optimize performance.
Used by the Service Technician.
17.00
01 00.00
02 00.00
03 00.00
04 00.00
05 00.00
06 00.00
07 00.00
08 00.00
Behind Blade
Compensation
MN1 60
Program 00
17.00
01 00.00
02 00.00
03 00.00
04 00.00
05 00.00
06 00.00
07 00.00
08 00.00
Front blade
Program 00
Clamping
Force
5
17.00
01 00.00
02 00.00
03 00.00
04 00.00
05 00.00
06 00.00
07 00.00
08 00.00
Compensation
MN1 60
Count Value
000160
8. F
unctIon
v
alues
Содержание 17P
Страница 4: ...ProCut 17P Installation and Operating Instructions Page iii ...
Страница 8: ...ProCut 17P Installation and Operating Instructions Page 2 2 ...
Страница 16: ...ProCut 17P Installation and Operating Instructions Page 5 4 ...
Страница 23: ......