ProCut 17P – Installation and Operating Instructions
Page 6-2
6. Press the Up or Down arrow buttons to select a
program number 00 - 80.
7. Press
ENTER
to select the program.
• The LCD displays the program number and cut
values associated with the program. The first cut
is highlighted.
Figure 16. Rendering of Sample Program
8. Using the Keypad, enter the value for the first cut.
• Use the
Down arrow
to proceed to and enter
the next cut value.
• Continue this process until all cut values are
entered.
9.
After the last cut value has been entered, key in a
value of 0.00. This signifies the end of your program
and will return the Back Gauge to your first cut value
position.
Figure 17.
00 Signifies End of Program
10. Press the
Enter
button to return the machine to the
home screen and auto setup for the first cut of your
program.
•
The first step is highlighted.
• You are now ready to begin your job.
11.
Make the first cut by simultaneously pressing the
Clamp Cut
and
Cut
buttons until it finishes cutting.
• The Back Gauge then moves to the second step
cut position, which is highlighted on the LCD.
Figure 18. Operating the Machine
• Once all cuts in the program have been completed,
the Back Gauge and LCD return to the first step in the
program.
12. Press the
Enter
button to exit the program.
13. Press the
arrow
to select the mode used in the
program and press the
Enter
button.
• The program number blinks.
14. Use the
Up
or
Down
arrow
to select program 00.
15. Press the
Enter
button.
16. Press the
“C”
button.
• The cutter is now back in manual mode.
Содержание 17P
Страница 4: ...ProCut 17P Installation and Operating Instructions Page iii ...
Страница 8: ...ProCut 17P Installation and Operating Instructions Page 2 2 ...
Страница 16: ...ProCut 17P Installation and Operating Instructions Page 5 4 ...
Страница 23: ......