Model 7000E Commercial Cutter
Installation, Maintenance, & Operating Instructions
Model 7000E Specifications
Thickness Capacity (24# bond) . . . . . . . . .1 1/2"
Width Capacity (With Stop) . . . . . . . . . . . . . .12"
Length Capacity . . . . . . . . . . . . . . . . . . . . . . .12"
Cutting Method . . . . . . . . . . . . . . . . . . . . . .Lever
Clamping Method . . . . . . . . .Manual Handwheel
Dimensions . . . . . . . . . . . . . . .19" x 19" x 13 1/8"
Shipping Weight . . . . . . . . . . . . .48 lbs. (21.8 kg)
Table of Contents
1.0 Parts . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
2.0 Installation . . . . . . . . . . . . . . . . . . . . . Page 2
3.0 Operation. . . . . . . . . . . . . . . . . . . . . . Page 2
4.0 Maintenance . . . . . . . . . . . . . . . . . . . Page 3
5.0 Parts List . . . . . . . . . . . . . . . . . . . . . . Page 6
6.0 Parts Diagram . . . . . . . . . . . . . . . . . . Page 7
7.0 Troubleshooting. . . . . . . . . . . . . . . . . Page 8
Serial # ____________________
INTRODUCTION
Thank you for selecting the Martin Yale Model 7000E Commercial Cutter. The 7000E has been performance-tested at the
Martin Yale factory. With recommended maintenance, the unit will provide years of trouble-free service. Please review
this publication in its entirety before attempting to operate your 7000E. Thorough understanding of this information will
help eliminate most operator-associated errors and ensure years of trouble-free performance.
WARNING!
The cutting blade of the 7000E is extremely sharp. Never place hands or fingers under
the cutting blade or into the cutting area. Serious bodily injury could result. Never allow children to
operate the 7000E unsupervised. The weight of the handle can cause the cutting blade to drop if the
spring-loaded safety arm is not fully engaged. Always make sure the spring-loaded safety arm is fully
engaged upon the completion of each cut by returning the handle to the full upright position. Test for
safety arm engagement before releasing the handle.
