Gazer PA 40F, Руководство пользователя

Страница: 16 / 48

16
EN
Painting of the sensors:
• During the preparation for painting, remove the spacing bushes from the sensors, then take out the sealing rings.
• Degrease the sensor surfaces to be painted.
• Paint the sensor parts.
•
The layer of paint should be minimum and uniform.
• The painting of sensors should be carried out by professional equipment.
• After the paint-and-lacquer coating has dried, assemble the sensors.
Pay attention!
• A thick layer of paint reduces the sensitivity of the sensor.
• Irregular painting and waves on the surface etc. may become the cause an incorrect operation of the system.
• The ingress of paint into the gap between the working surface and the spacing bush leads to the loss by the system of operability.
Connection of a Gazer PAD20 optional monitor
In order to connect the optional monitor, use the extending cable, which is supplied with the system.
Connection of the rear parking system
In order to join two parking assistants, it is necessary to connect a Gazer PAC10 optional cable to the joining connector of the
loudspeaker of the rear parking system and into the PRG connector at the central unit of the fore system. A mutual loudspeaker or
monitor is connected to the DSP connector at the central unit of the fore system.
Guidance on installation