Gazer PA 40F, Руководство пользователя

Страница: 15 / 48

15
EN
Guidance on installation
Installation of a remote loudspeaker:
• The installation of the loudspeaker should be executed in the cabin of the automobile.
• It is recommended that the installation place be arranged so that the adjustment of the loudspeaker volume can be accessible.
•
The installation place should be chosen so that the warning signals can be distinguishable from the driver’s place.
Connection of power supply:
• Black wire GND – should be connected to the automobile body or to the ground strap of the automobile proper wiring.
• Orange wire ACC – should be connected to the power supply of the accessories (arises while starting the engine and
disappear when shutting down it).
• Yellow wire CAN H – should be connected to the CAN H bus of the automobile.
• Green wire CAN L
– should be connected to the CAN L bus of the automobile.
It is recommended that the connection of power supply is carried out by supplied connectors.
Note: Make sure that the contact in the connection point of the ground wire is reliable. In case of a bad contact, the operation
of the system can become unstable.
Pay attention!
• In installing the parking system on the automobile without any connection to the CAN bus, the turning on of the system is carried out
with the button, which is located on the power-supply-connection wiring.
• If installed with the connection to the CAN bus, the button on the power-supply-connection wiring should be always in the OFF
position.