Instructions for GT1000DC
www.gatexpertstore.com
11
Figure 15
Step 7 - Limit Switch Stops
Included in your gate opener kit are two limit
switch stops which must be fitted to the gear
racks on your gate to ensure safe operation.
The limit switch stops are designed to set
the desired opening and closing position of
your gate. These limit switch stops are
designed to come into contact with the
spring/magnetic limit switch.
It is extremely dangerous that without or
incorrect installation of the limit switch stops
can cause crash of gate, damage of internal
structure of the motor, moreover, the gate
may slide off the guide rail.
Setting the Limit Switch Stops
Closed Position
·
Position gate 150-200mm back from the gate end catch closed position. This will help in
making sure you do not slam the gate into the end stop/catch when setting the closed position
under power.
Output Gear
Spring/Magnetic Limit Switch
Limit switch stop
Limit switch stop mounting screws
Gear rack
