Instructions for GT1000DC
www.gatexpertstore.com
13
Test the spring/magnetic limit switch stops by moving the gate manually until you hear a click,
making sure contact is made with the spring/magnetic limit switch on the motor.
To Reset: Turning the power off will reset the limit switch stop memory. Power on the gate
opener again, pressing remote control or external push button switch to open and then
close the gate once, then new limit switch stop setting is completed.
The installation of spring limit switch stops is shown in figure above.
The installation of magnetic limit switch stops is shown in figure above.
Open Position Limit Switch Stop
Closed Position Limit Switch Stop
Open Position Limit Switch Stop
Closed Position Limit Switch Stop
Magnetic limit switch
