Gatewing X100UAS Скачать руководство пользователя страница 45

Страница: 45 / 210

2.0

— 45 —

12 October 2012

PERATING

LIMITATIONS

5.1 Operating Limitations

Limitations which are not limited by the application result but by the system.

5.1.1

What

The X100 is limited by the forces of nature. Regardless of the picture quality, the X100 has an

operational envelope for which no flight may be undertaken or continued. The remote pilot

should abort the mission.

5.1.2

Overview

Gatewing determined the following conditions as maximal flight conditions:

Condition

Maxima

Time

Between sunrise and sunset

Distance from clouds

Clear of clouds and in sight of the surface

Flight visibility

5000 m (3.1 SM)

Operator-UAS visibility

Visual Line of Sight (VLOS)

Precipitation

avoid hail, snow and heavy showers

Maximal Head wind

65 km/h (40mph)

Maximal Cross wind

65 km/h (40mph)

Gusts

10km/h (6.2mph)

Turbulence

Turbulence to be avoided at all times

Temperature

-15 °C to + 55 °C (5 °F to 131 °F)

Maximal launching altitude

2000m AMSL

Содержание X100UAS



















































































































































































































Результаты поиска

Содержание X100UAS

Отзывы:

Gatewing X100UAS, Системное руководство, Страница: 45 / 210

Результаты поиска

Содержание X100UAS

Отзывы: