Gatewing X100UAS Скачать руководство пользователя страница 116

Страница: 116 / 210

2.0

— 116 —

12 October 2012

Quickfield

Create a project

16.7 Create a project

REREQUISITES

●

GCS with Quickfield software installed

●

Internet connection when defining project location online

●

GPS position

Creating a project is typically done in the office.

Open Quickfield and click New Project on the opening screen.

Define the project location:

●

Online

●

Google maps ™ functionality: Fill in your location of interest and click Search. The

Project map shows the area around this location using Google maps ™ .

●

KMZ or KML file: Click Open KMZ/L, select the KMZ or KML file you want to load

and click Open. The Project map view displays the area around the location speci

fied in the file using Google maps ™ . Supported features are place marks and poly

gons (coloring not supported).

●

GPS: Click Fix by GPS. The Project map displays the area around your current loca

tion using Google maps ™ .

●

Offline

Custom map: Click Import map, select the custom map you want to load and click

Open. The Project map displays the customized map.

OTE

: Be aware that the zoom level is fixed using this option.

Create a project background map. Move and scale the Project map to ensure the optimal

display of the project area:

●

The project area should be centered in the

Project map

●

The project area should cover 25 to 50 % of the Project map. In no case should the

project area lay outside the Project map.

●

The launching and landing location should both lay within the Project map.

OTE

: Keep in mind that scan areas might need to be rotated depending on the wind

direction.

Indicate the project area (optional). In the Project map you can mark the project area.

Click to set the first boundary point. Set all boundary points until you have a purple poly

gon which defines the project area.

OTE

: To clear all set boundary points, click Clear area.

Add project remarks (optional). In the Add project remarks field you can add additional

information such as contact info, obstacle info, ...

Содержание X100UAS



















































































































































































































Результаты поиска

Содержание X100UAS

Отзывы:

Gatewing X100UAS, Системное руководство, Страница: 116 / 210

Результаты поиска

Содержание X100UAS

Отзывы: