30
Gateway Solo™ 2200 Multimedia Notebook
Battery Pack Bay
Both Li-Ion and NiMH battery packs can be ”warm-swapped“ in the battery
bay. This means you can change battery packs while in Suspend mode.
To remove/replace the battery pack:
1. Save all work.
2. Press the Fn key together with the F4 (Suspend) key to put the system
into suspend mode.
3. Close the cover and turn the system over.
4. Slide the battery release latch to the left.
5. Hold the latch in place and place your fingers over the raised bar on the
battery pack next to the latch.
6. Slide the battery pack straight out and away from the system.
7. Slide a charged battery pack (bottom side up) straight into the battery
bay until it ”snaps“ into place.
8. Turn the notebook right side up and open the cover.
9. Press the power button to resume power to the system.
Battery
release latch
Figure 16. Locating the Battery Release Latch
Figure 17. Removing the Battery Pack
Warning: The battery can pose a fire or chemical burn hazard if mistreated.
Do not attempt to disassemble, heat above 60°C (140°F) or incinerate.
Содержание Solo 2200
