Gateway Solo 2200, Руководство пользователя

Страница: 16 / 82

16 Gateway Solo™ 2200 Multimedia Notebook
u Press and hold the power button for two seconds to turn the system
completely Off.
Caution: Any unsaved work can be lost if you hold the power button down
for too long.
Remember, when the system is on and set for
Suspend/Resume
mode, press-
ing the power button does not completely turn off the computer and the
system does not reboot. You must press and hold the power button for
two seconds to completely power down the system.
To check/change the power button setting:
1. Turn the system on.
2. Press the F2 key when you see the message
Press <F2> to access
SETUP
in the lower left corner of the display, before Windows 95 loads,
to access the Setup menus. The system beeps, then the
Main
menu
appears.
3. Using the Right Arrow key, move to the
Power
menu.
4. The first available option is
Power button mode:
. If the setting displayed is
the one you want, go to Step 6.
5. Press the Spacebar to change the setting.
6. Press the ESC key to access the
Exit
menu.
7. Press Enter to
Save changes & exit
, then press Enter again, or use the
Down Arrow key to select any other option.