manualshive.com logo in svg

Gateway LN-520, Руководство по эксплуатации

Поделиться
Скачать
Gateway LN-520 Скачать руководство пользователя страница 32

www.gateway.com

31

Repeat the above steps 1 to 3 to memorize other stations.

4

After selecting the tuner as an input
source, select the preset mode.

1

• The station has now been stored in

the memory.

• A stored frequency is erased from the

memory by storing another frequency
in its place.

• If “MEM” goes off, start again from

the above step 2.

• Then “PRESET” lights up.

• When pressing the /- buttons on the

remote control, you need not select the preset mode
on step 1.

Tuning to preset stations

Select the desired preset number.

2

Select the desired preset number (1~30) and press the MEMORY button.

3

SETUP

MEMORY

DECODING

TUNE MODE

Presetting radio stations

• You can store up to 30 preferred stations in the

memory.

• “MEM” is flickering for 5 seconds.

Tune in the desired station with auto or
manual tuning.

1

Press the MEMORY button.

2

SETUP

MEMORY

Scanning preset stations in sequence

• The receiver will start scanning the stations in the preset

sequence and each station is received for 5 seconds.

• At the desired station, press this button again to stop

scanning.

• When pressing this button without selecting the tuner,

the tuner will be selected automatically.

or

ADJUST

TUNING/PRESET

PRESET

-, +

or

ADJUST

TUNING/PRESET

PRESET

-, +

P.SCAN

OPERATIONS

Содержание LN-520































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды