manualshive.com logo in svg

Gateway LN-520, Руководство по эксплуатации

Поделиться
Скачать
Gateway LN-520 Скачать руководство пользователя страница 18

www.gateway.com

17

Ideal speaker placement  varies depending on the size of your room and
the wall coverings, etc. The typical example of speaker placement and
recommendations are as follows : 

■

■

Front left and right speakers and center speaker

Place the front speakers with their front surfaces as flush with TV or
monitor screen as possible.
Place the center speaker between the front left and right speakers

and no further from the listening position than the front speakers.

Place each speaker so that sound is aimed at the location of the listener’s
ears when at the main listening position.

■

■

Surround left and right speakers

Place the surround speakers approximately 40 inches (1 meter) above
the ear level of a seated listener on the direct left and right of them or
slightly behind.

■

■

Surround back speaker

Place the surround back speaker at the rear center facing the front at a
slightly higher position (0 to 10 inches) than the surround speakers.
We recommend installing the surround back speaker at a slightly
downward facing angle. This effectively prevents the surround back
channel signals from reflecting off the TV or screen at the front center,
resulting in interference and making the sense of movement from the
front to the back less sharp.

Speaker placement

FRONT (LEFT) 

SURROUND

(LEFT) 

SURROUND

(RIGHT) 

SURROUND

(BACK) 

LISTENING

POSITION 

FRONT (RIGHT) 

SUBWOOFER

CENTER

TV or SCREEN

For your reference, the sound from each channel can be reproduced according to the surround modes as follows:

Depending on the speaker settings and the number of the encoded channels, the sound from the corresponding
channels cannot be reproduced.(For details, refer to “Adjusting the speaker settings” on page 18.)

Channels

FRONT L/R

CENTER

SURROUND

SURROUND BACK

SUBWOOFER

Modes

L/R

DTS

—

DTS ES DISCRETE/MATRIX

DTS NEO CINEMA/MUSIC

DOLBY DIGITAL

—

DOLBY DIGITAL EX 

DOLBY PRO LOGIC

—

DOLBY PRO LOGIC II CINEMA/MUSIC

—

DOLBY VIRTUAL

—

—

—

MPEG

—

MATRIX

—

Other Surround

—

STEREO

—

—

—

7 CH DIRECT

Surround speaker

Front speaker

Surround back
speaker

Point slightly
downward

60 to 90 cm

■

■

Subwoofer

The subwoofer reproduces powerful deep bass sounds.

Place a subwoofer anywhere in the front as desired.

■

■

Notes : 
When using a conventional TV , to avoid interference with the TV picture,
use only magnetically shielded front left and right and center speakers.
To obtain the best surround effects, the speakers except the subwoofer
should be full range speakers.

BEFORE OPERATION

Содержание LN-520































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды