manualshive.com logo in svg

Gateway LN-520, Руководство по эксплуатации

Поделиться
Скачать
Gateway LN-520 Скачать руководство пользователя страница 30

www.gateway.com

29

Downmixing into 2 front channels

• To cancel the 2 - CH downmix mode, select the

desired surround mode with the DSP MODE DOWN
(

◀

) or UP(

▶

) button.

• When the playback of the source on the player is

stopped, interrupted, etc., the 2 - CH downmix mode
is not canceled even though “ ST” and the DTS or
Dolby Digital indicators go off.

• If the headphones are plugged while the digital

signals from the DTS, Dolby Digital or MPEG
program sources are being input, it will enter the 2-
CH downmix mode automatically and if the
headphones are unplugged in the 2-CH downmix
mode, it will return to the previous mode.

• Allows the multi - channel DTS, Dolby Digital or

MPEG signal to be reproduced through only two
speakers or through headphones.

• When the digital signals from the DTS, Dolby Digital

or MPEG program sources are input in available
surround mode, press the STEREO button.

• “ST” indicator lights up and “2 CH DOWNMIX” is

scrolled, meaning it enters the 2-CH downmix mode,
and then the discrete multi-channels(except LFE) are
mixed down into 2 front channels.

STEREO

OPERATIONS

Содержание LN-520































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды