Gateway E-9425R, Руководство пользователя

Страница: 61 / 128

Replacing the ROMB battery pack for the mezzanine RAID card www.gateway.com
55
12
Follow the instructions in “Closing the server case” on page 32 .
13
Reinstall the hot-swap drives back into the server. Make sure that you
install the drives into the same bays you removed them from in
Step 4 . For
instructions see “Removing and installing a hard drive” on page 36 .
14
Replace the bezel by snapping it into place on the front of the server.
Replacing the ROMB battery pack for the mezzanine RAID
card
Warning
Danger of explosion if the battery is
incorrectly replaced. Replace only with
the same or equivalent type
recommended by the manufacturer.
Dispose of or recycle used batteries by
taking them to a hazardous waste
facility. Follow all local regulations for
correct battery disposal.
To replace the ROMB battery pack for the mezzanine RAID card:
1
Follow the instructions in “Preventing static electricity discharge” on
page 30 . Make sure that you turn off the server, then unplug the power
cord(s) and all other cables connected to the server.
2
Follow the instructions in “Opening the server case” on page 31 .
3
Press the release handle (1), then slide the ROMB battery pack for the
mezzanine RAID card (2) toward the back of the chassis to release it from
the locking tabs and lift it out of the chassis (3).
4
Align the holes in the bottom of the new ROMB battery pack for the
mezzanine RAID card (1) with the locking tabs in the chassis, then press
it into place in the chassis.