Gateway E-9425R, Руководство пользователя

Страница: 23 / 128

Mounting your server into a cabinet www.gateway.com
17
2
Attach the handles to the sides of the server with two mounting screws
on each side.
3
Remove the bezel lock keys from the inside of the bezel, then insert the
left side of the bezel into the left handle and swing the right side of the
bezel in until it snaps into place.
4
When the bezel is in place, lock the bezel by inserting the key into the lock
in the lower right corner of the bezel and turning it clockwise until it stops.
5
Put the key in a safe place.
Removing the server from a cabinet
To remove the server from a cabinet:
Warning
Screws are required to support the front
and back of the server. You must support
the server while removing the front
screws and back screws. If the server is
not supported, damage to the server or
injury may result.
1
While supporting the server, remove the front and rear mounting screws
that hold the server in the cabinet.
2
Remove the server from the cabinet.