Gateway E-9425R, Руководство пользователя

Страница: 38 / 128

CHAPTER 4: Installing Components www.gateway.com
32
7
Press down the two blue retaining clips (1) on the sides of the top front
cover, then slide the top front cover back (2) and lift it off the server.
Closing the server case
Important
The hard drive carriers shown in these
illustrations may look different than the
actual hard drive carriers in your server.
To close the server case:
1
Make sure that all of the internal cables are arranged inside the case so
they will not be pinched when you close the case.
2
Place the front top cover on the case and slide the cover forward, then
lift the two blue retaining clips into place.
3
Place the rear top cover (1) on the case, then slide it forward until it clicks
into place.