Gateway E-824R, Руководство пользователя

Страница: 64 / 116

Using the Configuration page www.gateway.com
59
3
To change the IP address from a static address to a dynamic address, click
the box next to
DHCP .
To set the network configuration:
1
To change the values of the subnet mask, gateway, Simple Network
Management Protocol (SNMP) server, or the time server, type in the new
address, using the
T
AB
key to move from box to box.
2
Click Submit .
Setting security options
When you enable the security option, users must enter a password to access
the autoloader's front panel functionality (see
“Default username and
password” on page 55 ). A password allows either administrator-level access or
operator-level access (see “Setting security” on page 32 ).
To set security:
1
From any page, click Configuration . The Configuration screen opens.
2
Click Security on the left side of the screen. The System Security section
of the screen displays.
3
To enable front panel security, click the box next to Front Panel Security
Enabled .
If the box is blank, the security option for the front LCD panel is not
enabled.
4
Click Submit .
To reset the front panel password:
1
From any page, click Configuration . The Configuration screen opens.
2
Click Security on the left side of the screen. The System Security section
of the screen displays.
3
Click the box next to Reset Front Panel Password . A check mark appears.
4
Click Submit .
To set User Administration:
1
From any page, click Configuration , then press E
NTER
. The Configuration
submenu opens.
2
Click Security on the left side of the screen. The System Security section
of the screen displays.