Gateway 930 series Скачать руководство пользователя страница 126

Страница: 126 / 160

118

Troubleshooting

Printer problems

The printer will not turn on.

The printer is turned on but will not print.

Probable cause

Solution

The printer is not connected
to the system

Make sure the data cable is properly
connected between the printer and the system.
Check the connector and cable for bent or
broken pins.

The printer is not plugged in

Make sure the power cable is plugged into a
working power source.

The printer is not turned on

Make sure the printer’s power switch is
depressed or set to the On position. If the
printer is turned on, the green power LED
should be illuminated.

The printer is defective

Try another printer, if one is available.

Probable cause

Solution

The printer is not connected
to the system

Make sure the data cable is properly
connected between the printer and the system.
Check the connector and cable for bent or
broken pins.

The printer is not designated
as the default printer

If the printer that you are trying to print to is
not the default printer, make sure you have
selected it through the program’s printer setup
function.

The printer has not been
added to the system

In the Printers window (Start | Settings |
Printers), double-click Add Printer. Follow the
on-screen instructions for adding the new
printer.

The printer is not on-line
(ready)

Make sure the on-line or ready light is on, or
the display indicates “Ready.”

8508088.book Page 118 Thursday, November 1, 2001 9:35 AM

Содержание 930 series

































































































































































Результаты поиска

Содержание 930 series

Отзывы:

Похожие инструкции для 930 series

Бренды по названию

Популярные бренды

Gateway 930 series, Системное руководство

Результаты поиска

Содержание 930 series

Отзывы:

Похожие инструкции для 930 series

Бренды по названию

Популярные бренды