SWAGING
PROCEDURES
Mark hose for proper insertion depth into coupling . See Gates
Hose Swage Data chart for insertion depth . Use a lightweight
oil to lubricate the inside diameter of hose . Place the coupling
hex into a vise and insert hose to insertion depth .
The following are the basic swage procedures . For specific
instructions for your crimper or swager, please refer to the
appropriate operator’s manual . Swaging can be accomplished
with either the Gates HS-1 Hand Swager (Product No . 7483-
1000) or with the Swager Conversion Kit for the Power Crimp
®
707 (Product No . 7480-0040) .
1 . See Swage Data chart to select specific pusher and die for
each coupling and hose combination to be swaged . The
Swage Tooling page contains specific part/product number
information for each pusher and die .
2 . Insert the correct die and pusher into the swaging machine .
3 . Lubricate inner bore surfaces of dies with a thin film of
lightweight oil .
4 . Feed hose assembly through the dies and hold hose and
coupling into the pusher . Start the swage .
5 . Swage is complete when pusher bottoms out on dies .
11
DOWNLOAD THE ECRIMP APP OR GO TO WWW.GATES.COM/ECRIMP
PO
WER STEERING
MC 4-20 DD & PS
GC16XD
PC707/SC32
GC32-XD/FLEX
GC96
SWA
GING
GENERAL
GATES
SWAGING PROCEDURES