Gates Underwater Products PRO ACTION, Руководство по установке, использованию и уходу

Страница: 26 / 53

PRO ACTION Setup Page 26
Config Cables Install
At this point it’s time to make power and record trigger connections to the housing.
Using the table at the beginning of this manual, select the appropriate cables and install
as shown in the image below.
Power. The Power cable will connect on the rear side from the Master Power
Switch, and then to the camera.
Record Trigger. Similarly, an adapter cable will connect between the housing body
as shown, and to the appropriate camera location.
Record Trigger Cable will
connect here.
Power Cable will connect here.
Example: Power Cable
connection for DSMC2
camera.
Record Trigger Cable
connection for DSMC2
camera.