PRO ACTION Setup
Page 14
PRO ACTION Housing Preparation
Handle Grips Install.
Four screws secure the Handle Grips to PRO ACTION. You
can locate the Handle Grips in several different positions forward / aft on the
housing.
SHOWN
are ULCS mount
balls and the carry lanyard
brackets.
Port.
Remove the Port by rotating 90 degrees either direction. Gently pull the Port
away from the Port Extender.
Rotate the port 90 degrees either
direction, then gently pull forward to
remove.
1
2
TIP:
Consistent
lubrication of the Port
and SPR o-rings
allow easy rotation.
Содержание PRO ACTION
Страница 1: ...PRO ACTION Housing Setup Use and Care Guide...
Страница 4: ...Introducing Pro Action Page 4 This page intentionally left blank...
Страница 24: ...PRO ACTION Setup Page 24 ARRI Camera install Next install the mount adapter onto the ARRI camera as shown...
Страница 48: ...PRO ACTION Operation Page 48 Install the taller feet...