Gates Underwater Products PMW-200, Руководство по установке, использованию и уходу

Страница: 23 / 26

Gates Underwater Products, Inc
13685 Stowe Drive • Poway, CA • 92064 • 858.391.0052 • 800.875.1052 • Fax 858.391.0053
Customer.srvc@GatesHousings.com • www.GatesHousings.com
03/09/13 23
Optional Submersible Microphone
If you have the submersible microphone installed on your Gates housing, there are
special considerations for setting up your camera and connections to capture external
audio.
The PMW-200 cameras require the use of the XLR audio adapter. Plug
this into the
CH-1 connector on the camera and then plug the
submersible microphone into this adapter. Be sure to fully engage the
connectors.
For more detailed information about these settings consult the PMW-
PMW-200 user manual.

On the face of the Audio Panel set the switches as follows:

AUDIO IN:

Set both Ch1 and Ch2 to EXT

AUDIO SELECT

Set to MAN to adjust audio volume manually.

Set to AUTO to allow the camera to adjust volume automatically.

+48V must be set to ON for the channel in use by the microphone.

Next, enter the MENU and make the following settings/adjustments.

AUDIO SET

AUDIO INPUT

TRIM CH-1

(Adjust to desired sensitivity)

AUDIO SET

AUDIO INPUT

TRIM CH-2

(Adjust to desired sensitivity)

AUDIO SET

AUDIO INPUT

AGC LINK

(Set to LINKED or UNLINKED as your
circumstance requires.)

AUDIO SET

AUDIO INPUT

1 KHz TONE

OFF

AUDIO SET

AUDIO INPUT

WIND FILTER CH-1

OFF

AUDIO SET

AUDIO INPUT

WIND FILTER CH-2

OFF

AUDIO SET

AUDIO INPUT

EXT CH SELECT

CH1/CH2 (to record sound to both
audio tracks. Set this to CH1 if you wish to record only to CH 1 audio track)
Set AUDIO IN to EXT
Set AUDIO SELECT to manual if you wish to
adjust volume manually
Set MIC to
‘MIC+48V’
Plug XLR
adapter into
CH-1 input.