PF4K Setup
Page 22
Insert the Monitor Cable to the PF4K Housing.
Refer to the illustration. The
TVL55 monitor cable is a 'pass through' type that inserts into bulkhead opening on
the upper right side of the housing. Insert the BNC connector and route the cable to
the rear of the housing to the position shown in the next illustration.
Tighten the brass collar
until snug.
Connect to the camera
. An HDMI adapter cable is supplied with your PF4K kit to
make the final connection to the camera from the TVL55 monitor cable.
Insert the TVL55 Monitor Cable into the
camera housing as shown. Tighten the
brass collar until snug.
Connect the TVL55 to the
monitor out.
Optional: Connect the
surface feed to one of the
HDSDI outputs.
