PF4K Setup
Page 20
Lubrication.
Lubricate the yellow Port o-ring with silicone grease. Also liberally
lubricate the Port bore. This will greatly aid installation of the Port.
TIP:
Liberal lubrication of the Port and Port Ring o-ring allows easy rotation during
installation/removal.
Install the Port.
The Port will mate with the Port Extender and then rotate 90
degrees clockwise to its normal position.
Verify seals.
Inspect the Front Bulkhead, Port Extender and Port are fully seated
with no gaps.
N
O=
Mate the Port then
rotate 90° CW until the
port is aligned properly.
