Y58
User Manual & Install Guide
140 of 148
You can also use the
ICD2’s touch screen to perform these tasks starting with the Menu button.
Move the cursor to the Setup icon and press Enter.
Navigate to
Surveillance>Record>Mainstream
to setup the Analog channels (one through four).
To set up IP Channel navigate to
Surveillance>IPC Setup
.
To set Vehicle ID, navigate to
Basic Setup>Regist Info>Vehicle Info
.
After setting the configurations, with the Hard Drive inserted, access the Setup menu. Navigate
to
Setup>Maintenance>Storage
to format the Hard Drive.
Please note:
non-Gatekeeper branded Hard Drive may not function reliably. If used, non-
Gatekeeper branded Hard Drive must be formatted in the Y58 prior to use.
Start the vehicle, and wait for the recorder to boot up (approximately two minutes). Confirm
live camera video is visible on the monitor (small Green camera in each camera image
–
indicates the Y58 is recording).
Confirm Y58 is recording by observing the LED as per the following table.
Record Mode
Safe to Remove Hard Drive
LED
COLOR
Flashing Status
LED
COLOR
Flashing Status
PWR Blue
Constant On
PWR
Blue
Off
REC
Green
Constant On
REC
Green
Off
USB
Green
Constant On
USB
Green
Off
ERR
Orange
Constant On
ERR
Orange
Off
ALM Red
Constant On
ALM
Red
Off
NET
Green
Constant On
NET
Green
Off
Note: The NET status LED is currently not supported.
To access the Caddy, turn key to the unlocked position, wait for the LEDs to turn off, and pull the Caddy
out.
