G4-508HD4a User Manual & Install Guide
Basic System Quick Start
42 of 162
Driver Name
If desired, you may also key in the name of the
vehicle driver here.
Maximum of:
10 characters
4.6
Step 6: Setting Basic Preferences
Next you will need to setup the ignition on/off delay time.
Navigate to:
Main Menu
à
Setup
à
Basic Setup
à
Startup
Please verify that the following default settings are correctly configured. For a detailed explanation of each
setting, please see
Section 6.3.3
.
ON/OFF
ON/OFF Mode
DEFAULT SETTINGS:
§
Ignition
Ignition Delay
DEFAULT SETTINGS:
§
300
This means that when the vehicle is turned off, the
device will continue to record for another 300
seconds (5 minutes) before shutting down.
Please change this setting to reflect the preferred
duration of time you wish to continue recording
after the vehicle is turned off.
After that, you need to select the preferred speed measurement unit which will be used by the device.
Navigate to:
Main Menu
à
Setup
à
Collection
à
General
Please verify that the following default settings are correctly configured. For a detailed explanation of each
setting, please see
Section 6.5.1
.
Speed
Unit
DEFAULT SETTINGS:
§
MPH
Please set the preferred speed measurement unit
used in your region of operations.
Fleets operating in United States will typically use
MPH. Fleets operating in most other parts of the
world (including Canada) where the metric
system is adopted will typically choose KM/H.
