G4-304SD1a
User Manual & Install Guide
123 of 151
the camera channels to be included in the display and recording.
Post Recording
– drop list which allows you to select the duration
for which video will continue to be recorded when the alarm is
triggered.
Lock
– checkbox, if selected will mark the recorded video associated
with this alarm as locked video.
Linkage IO Output
– checkboxes, if enabled, the device will send a
signal to the selected IO output lines.
Output Delay Time
– numeric text field to set the delay time for the
IO output (in seconds).
Alarm Upload
– checkbox, if selected will enable the device to
upload the alarm to the center server.
Linkage Screen
– drop list to select the options to display the video
from the selected cameras on-screen when the alarm occurs.
None
: Not displayed.
Single
: Display 1 camera.
Quad
: Display 4 cameras.
If Single (1x1) or Quad (2x2) display is selected, the
( Setup )
button allows you to select the layout of the channels to be displayed on-
screen.
The drop lists are shown on-screen
accordingly to the grid
layout mode selected. You can easily choose each individual camera
channel to be displayed in the selected grid segment visually. If you have
less cameras than
available grid segments, then those
segments
associated with an actual
camera will be displayed as a black box
PB Alarm Duration
– numeric text field to set the duration of the
video playback (in seconds) when the alarm occurs.
Alarm Snap
– checkbox – if selected, when the alarm occurs, the
device will take snap shots using the selected cameras.
DEFAULT SETTINGS:
Choose the camera channels to display and record in the event of this alarm
being triggered.
Motion
Name
Set to Motion.
Enable
Enables whether or not motion detection will be enabled.
Default settings:
Unselected.
