29
EVENT
.
SENSOR
Sensor setup consists of two pages of options which are user definable.
S1; S2 and S3 are pre-defined and factory defaults are set for BRK
(Brakes); WRN (Warning Lights) and STPARM (Stop Arm). S7 and S8
are currently unassigned and reserved for future development.
The OSD setting is limited to two characters.
It is recommended that SET remain at its factory defaults of HIGH.
Alarm determines if the Alarm LED will flash when the Sensor is activated.
LOCK sets if the recorded video file created by the sensor will be protected from being over-written.
On the second page of Sensor Configuration the actions which will
occur when a Sensor Trigger has been activated can be set.
In the example on the right, when SENSOR 1 is activated Channel 3
will be recorded and displayed full screen on playback.
FULL SCREEN options can be set for CH1 through CH8, CH1- CH4;
CH5 - CH8 or NONE.
Figure 15: Sensor Settings/Actions.
ALARM OUTPUT
THIS FEATURE IS CURRENTLY NOT SUPPORTED.
