26
NETWORK
.
The NETWORK menu is sub-divided into Five sub-menu’s; LOCAL; SERVER; WIFI; MOBILE NETWORK and FTP SETTINGS. Each of
these sub-menu’s are configurable by the user.
LOCAL
Local settings are used to allow the 508-HD to have network connectivity either through an external wi-fi module, or, direct
connection to a network switch/hub.
Please consult with your I.T. department for all required information relating to IP; DNS Server, etc. if connecting the 508-HD
directly to a network
1.
IP. This is the IP Address for which the 508-HD has
been pre-configured.
2.
SUB. The subnet the 508-HD will be using.
3.
GATE. When an external Wi-Fi module is being utilized,
Gateway address has been pre-configured to allow
communication between the 508-HD and the
network.
4.
Client Port and Web Port. These are the ports which
will be need to be opened to allow communication of
the 508-HD to the network.
5.
DNS. Allows communication between the 508-HD
and the host network.
6.
MAC Address. The MAC address of the 508-HD
Figure 13: Local Network Settings.
SERVER
The IP address’ shown are for example only. Please consult with your I.T. department for all required information relating to IP;
DNS Server, etc.
CENTER SERVER 1
OPTIONS
Cable Net
Select this option when a CAT5/6 cable is directly connected from a
PC/Server to the 508-HD, or, when using an external Wi-Fi radio.
Mobile Net
Allows connection to the 508-HD via 2G/3G cellular networks.
Wi-Fi Net
Select this value when the 508-HD is going to use the internal Wi-Fi module for
communications.
MESSAGE SERVER
OPTIONS
Domain Name
If a fully qualified domain name is available, this option can be utilized. Enter the
FQDN in the text entry box below this option.
Static IP
If a dedicated IP address can be assigned this option can be selected. If this
option is selected enter the IP address of the server in the text box below. The
IP address must use all digits contained within the octet. For example, if the
server has an IP address of 10.5.0.100 the digits entered into the IP address
text box would be in the following format: 010.005.000.100
PORT
This should be left at its default value.
