SECURITY
General safety regulations
- Read the entire instruction manual carefully.
- The connection to the mains power supply must be made in accordance
with the safety regulations in force in the country of use.
- The socket, to which the machine is to be connected, must be:
- conform to the type of plug installed in it;
- dimensioned to comply with the data on the nameplate on the side of
the appliance.
- connected to an efficient earthing system.
- connected to a differential and magnetothermal system.
- connected to a system certified according to the respective safety
regulations in force in the country of use.
- The power supply cable must not:
- come into contact with any type of liquid: danger of electric shock
and/or fire;
- be crushed and/or come into contact with sharp surfaces;
- be used to move the machine;
- be used if damaged;
- be handled with wet or damp hands;
- be wrapped in a skein when the machine is in operation.
- be tampered with.
- It is forbidden:
- to install the machine in areas where a jet can be used of water.
- Use the machine in the vicinity of flammable and/or explosive
substances.
- leave plastic bags, polystyrene, nails, plastic bags within reach of
children.
etc. as they are sources of potential danger.
- let the children have the opportunity to play and stay in the
near the car.
- use spare parts not recommended by the manufacturer.
- make any technical modifications to the machine.
- immerse the machine in any type of liquid.
- wash the machine with a jet of water.
- use the machine in different ways from those described in the manual.
- use the machine in altered psychophysical conditions; under the
influence of drugs, alcohol, psychotropic drugs, etc..
- install the machine on top of other equipment.
- use the machine in explosive, aggressive or high concentration of dusts
or oily substances suspended in the air;
- the use of the machine in an atmosphere where there is a risk of fire;
- the use of the machine to dispense substances unsuitable for the
characteristics of the machine;
- cleaning or maintenance of the machine with the main switch on the
position -ON- and with the plug inserted in the socket.
- Before cleaning the machine, make sure the plug is unplugged from the
outlet; wait until the machine has cooled down properly.
- Do not wash the machine with petrol and/or solvents of any kind.
- Any repair can only be carried out by an Authorised Service Centre
authorised by the Manufacturer and/or in any case by specialised and
trained personnel.
- Do not place the machine near heating systems (such as stoves or
radiators).
- In case of fire, use carbon dioxide (CO2) extinguishers. Do not use water
or powder extinguishers.
In case of improper use, any form of warranty will be forfeited and the
manufacturer will not be liable for any damages.
declines any responsibility for damage to persons and/or property.
