71
TROUBLE SHOOTING GUIDE
Possible problem
Easy solution
Machine will not work when
switched ´ON´
The safety locking arm may not be correctly engaged
in the vertical operating position with the locking arm
located into the two grooves on either side of the juicer
cover (regard ´Assembling the appliance)`.
Motor appears to stall when juicing
Wet pulp can build up under the cover if the juicing
action is too vigorous. Try slower juicing action by
pushing the food pusher down more slowly. Clean the
integrated pulp container, the stainless steel filter basket
and the juicer cover (regard ´Clear blockage`).
Excess pulp building up in the filter basket
Stop the juicing process. Remove the juicer cover, scrape
off pulp. Reassemble and begin juicing again. Try alter-
native (soft and hard) vegetable and fruit varieties.
Pulp too wet and reduced extracted juice
Try a slower juicing action.
Remove juice disc and thoroughly clean mesh walls
with a cleaning brush. Rinse the juice disc under hot
water. If the fine mesh holes are blocked, soak the
basket in a solution of hot water with 10% lemon
juice to unblock the holes or wash in the dishwasher.
This will remove excess fibre build up (from fruit or
vegetables) which could be inhibiting the juice flow.
Juice leaks between the rim of the Juicer
and the juicer cover
Try a slower juicing speed and push the food pusher
down the feed chute more slowly
Juice sprays out from spout
Use juice jug and lid provided, or if juicing into
a glass use the custom designed juice nozzle.
Try using fruits with more water content to help
flush through the contents. Additionally, try a slower
juicing action by feeding one piece in at a time and by
pushing the food pusher down more slowly.
When using the Smoothie Attachment, the filter bowl
surround becomes full and clogs its spout.
Try using fruits with more water content to help
flush through the contents. Additionally, try a slower
juicing action by feeding one piece in at a time and by
pushing the food pusher down more slowly.