Gastroback DESIGN ESPRESSO PICCOLO PRO, Инструкция по эксплуатации

Страница: 16 / 23

30 31
THE APPLIANCE
4
3
2
1
5
6
10
11
12
13
14
15
16
7
8 9
17
1. Steam button
2. Double cup button
3. Single cup button
4. On/off button
5. Drip plate
6. Drip tray
7. Internal drip tray
8. Single cup filter
9. Double cup filter
10. Measuring spoon with tamper
11. Filter holder
12. Steam wand
13. Steam wand handle
14. Steam knob
15. Water tank
16. Water tank lid
17. ESE pod
30
BEFORE FIRST USE
INITIAL CLEANING
• Carefully remove the appliance from the packaging and remove all packaging
materials.
• Remove all accessories from the packaging and from the appliance.
• Remove the water tank.
• Clean the water tank and its lid, the measuring spoon and the filters as well as
the filter holder with warm water and some mild dish-washing liquid. After that,
rinse with clear water and dry with a soft dry cloth.
• Wipe the body of the appliance and the drip tray with drip plate using a soft,
damp cloth and dry all parts with a soft dry cloth.
• Never clean any of the appliance's parts in the dishwasher.
INITIAL USE
1. Fill the water tank with cold water up to the MAX marking.
2. Connect the power plug to an electrical outlet with suitable voltage.
3. Press the on/off button. The operating light lights up and the appliance starts
preheating automatically. Once preheating is finished, all the button indicators
light up continuously. The preheating process takes approx. 2 minutes.
4. Place a cup under the steam wand. Turn the steam knob to the steam/hot
water setting. Let the hot water flow out of the steam wand for approx. 8
seconds, then turn the steam knob to the OFF setting. This process allows the
water to flow into the empty pump for the first use.
NOTE
There will be a loud noise and little shake when the appliance is operating for the
first time. It's normal for a 20bar pump. The noise will be weaker during future usage.
5. Insert a filter into the filter holder.
NOTE
The filter might be a little tight and hard to take out from filter holder. You can use
the other filter to pry it out.
6. Insert the filter holder without ground coffee into the brewing head with a 45°
movement to the left and turn it to the right to lock it in place. The filter holder
must be perpendicular to the appliance or slightly tilted towards the right.
7. Place an empty cup on the drip plate and press the single or double cup button
to start operation.