Gastroback Design Espresso Advanced Plus, Руководство по эксплуатации

Страница: 52 / 64

52
ADvAnceD teMperAture
setting
The water temperature can be increased
or decreased by 1°C or 2°C if desired.
Coffee of different origins or roast profiles
may need a different espresso brew water
temperature to optimise their flavour. If your
espresso is tasting slightly “ashy” decrease
the brew water temperature by 1°C. If your
espresso is tasting slightly “sour” increase
your brew water temperature by 1°C.
HOT WATER
STEAM
POWER
CLEAN ME
PROGRAM
voreingestellte Temperatur
-2 ˚ C
-1
˚
C
+1
˚
C
+2
˚
C
Auswahl
BESCHREIBUNG ANZEIGE
HOT WATER
STEAM
POWER
CLEAN ME
PROGRAM
DEFAULT TEMPERATURE
-2 ˚ C
-1
˚
C
+1
˚
C
+2
˚
C
SELECT
DESCRIPTION INDICATOR
To amend temperature settings:
• With the machine OFF, press and hold the
1 cup button and then simultaneously press
and hold the power button.
POWER
• A beep will sound to indicate that the tem -
perature settings can now be changed.
• The LED of the last saved setting will be
illuminated. See table on left.
• Pressing the 2 cup button allows you to
toggle between the different settings.
• Please note that if the 2 cup button is not
pressed within 10 seconds, the machine will
return to STANDBY mode and the above
steps have to be repeated
• After you have made a selection, 2 beeps
will sound to indicate that your setting has
been saved.
• The machine will then return to STANDBY
mode.
the Art oF teXturing MilK
The appliance comes complete with a com-
mercial style swivel steam wand.
• Fill the stainless steel frothing jug maxi -
mum ½ full with cold, fresh milk.
• Turn the steam selector dial to the Steam-
position. The red steam light will start to
flash indicating that the machine is heating
to create steam.
• When the steam light stops flashing it is
ready to use.
• Before inserting the wand into the milk,
pause the steam by returning the dial back
to the STAND BY-position. This will avoid
splashing the milk out of the jug (this pause
function lasts for 6 seconds before exiting
steam mode).
• Insert the wand into the milk and return
the steam dial back to Steam-position.
• To stop, return the steam dial to the
STAND BY-position and remove the jug.